MULTI-STAGE STRATEGIC LOCATION SELECTION IN THE IRON AND STEEL INDUSTRY: A MACRO-LEVEL DECISION MODEL BASED ON GROUP AHP-WASPAS
Özet
Location selection in the iron and steel industry is a long-term strategic decision shaped by high capital requirements, energy use, raw-material needs, logistics, market access and environmental regulation. This chapter develops and applies a three-stage, macro-level decision model that moves from country development group to international target market and then to candidate country. At each stage, criteria are weighted using group Analytic Hierarchy Process (AHP), while alternatives are ranked using the Weighted Aggregated Sum Product Assessment (WASPAS) method. The design combines expert-informed priorities with performance indicators drawn from international institutional sources.
The first stage compares developed and developing country groups using institutional maturity, technological capacity, input costs and market dynamism. The second evaluates the European Union, Asian and Middle Eastern and North African (MENA) market groups against logistics efficiency, tariff freedom, transparency, freight distance and environmental performance. The third compares Romania, Türkiye and Algeria using seven criteria: logistics, energy costs, market growth, raw-material security, sustainability, operating costs and institutional quality. Criteria were identified through a structured review of relevant literature; three experts representing research, academia and industry provided pairwise judgements. All group AHP matrices met the accepted consistency threshold. Robustness was assessed through alternative WASPAS λ values, weight scenarios and critical-weight thresholds.
The base model ranks the developing-country group first, the EU as the preferred target market, and Algeria as the leading candidate country. These results reflect the model’s specified criteria, data and expert-derived weights; they do not constitute a universal investment recommendation. The ranking is sensitive to investor priorities. Türkiye ranks first when logistics receives sufficiently greater weight, energy becomes more influential under the model’s cost structure, or literature-frequency weights are used. Romania becomes the top candidate in a scenario that gives greater priority to environmental performance and institutional quality. For the target-market stage, the EU leads across most tested scenarios, while a freight-cost-dominant scenario shifts the first rank to MENA.
The chapter’s contribution is a transparent, sequential decision architecture that links global screening to candidate-country evaluation and reports conditions under which rankings change. It offers a replicable framework for strategic pre-investment analysis in steelmaking, where market access, energy and materials, logistics, institutional conditions and environmental requirements interact. Because the analysis is macro-level and relies partly on proxy indicators and estimated inputs, it should be followed by country-specific feasibility analysis and, within the selected country, regional, site, infrastructure, permitting and project-level assessment.
Anahtar Kelimeler: iron and steel, location selection, group AHP, WASPAS, multi-criteria decision-making, sensitivity analysis
Konu Alanı: Mühendislik -> Mühendislik (diğer) -> Endüstri Mühendisliği
Aczél, J., & Saaty, T. L. (1983). Procedures for synthesizing ratio judgements. Journal of Mathematical Psychology, 27(1), 93–102. https://doi.org/10.1016/0022-2496(83)90028-7
Adiya, Z., Dorjgotov, B., Bayarsaikhan, S., & Myagmartseren, P. (2021). Determining the suitable location for the metallurgical and steel processing industries in Mongolia using GIS-based multi-criteria analysis methods. The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences, XLIII-B4-2021, 63–69. https://doi.org/10.5194/isprs-archives-XLIII-B4-2021-63-2021
Akıncı, I. B., Ersöz, F., & Boran, S. (2023). Factors affecting cost in iron and steel industry: A brief review. International Journal of Industrial Management, 17(2), 99–107. https://doi.org/10.15282/ijim.17.2.2023.9458
Ar, İ. M., Baki, B., & Özdemir, F. (2014). Kuruluş yeri seçiminde bulanık AHS-VIKOR yaklaşımının kullanımı: Otel sektöründe bir uygulama [The use of a fuzzy AHP-VIKOR approach in facility location selection: An application in the hotel sector]. Uluslararası İktisadi ve İdari İncelemeler Dergisi, 7(13), 93–114. https://doi.org/10.18092/ijeas.07453
Arvis, J.-F., Ojala, L., Shepherd, B., Ulybina, D., & Wiederer, C. (2023). Connecting to compete 2023: Trade logistics in an uncertain global economy. World Bank.
Ataei, M. (2005). Multicriteria selection for an alumina-cement plant location in East Azerbaijan province of Iran. The Journal of the South African Institute of Mining and Metallurgy, 105(7), 507–514.
Badi, I., & Abdulshahed, A. (2021). Sustainability performance measurement for Libyan iron and steel company using rough AHP. Journal of Decision Analytics and Intelligent Computing, 1(1), 22–34. https://doi.org/10.31181/jdaic1001202222b
Badri, M. A. (1999). Combining the analytic hierarchy process and goal programming for global facility location-allocation problem. International Journal of Production Economics, 62(3), 237–248. https://doi.org/10.1016/S0925-5273(98)00249-7
BIR. (2025). World steel recycling in figures 2020–2024 (16th ed.). Bureau of International Recycling.
Block, S., Emerson, J. W., Esty, D. C., de Sherbinin, A., Wendling, Z. A., et al. (2024). 2024 Environmental Performance Index. Yale Center for Environmental Law & Policy. https://epi.yale.edu
Bohr, K. A. (1954). Investment criteria for manufacturing industries in underdeveloped countries. The Review of Economics and Statistics, 36(2), 157–166. https://doi.org/10.2307/1924666
Chakraborty, S., & Zavadskas, E. K. (2014). Applications of WASPAS method in manufacturing decision making. Informatica, 25(1), 1–20. https://doi.org/10.15388/Informatica.2014.01
Chang, P.-Y., & Lin, H.-Y. (2015). Manufacturing plant location selection in logistics network using Analytic Hierarchy Process. Journal of Industrial Engineering and Management, 8(5), 1547–1575. https://doi.org/10.3926/jiem.1456
Conceição, S. V., Pedrosa, L. H. P., Neto, A. S. C., Vinagre, M., & Wolff, E. (2012). The facility location problem in the steel industry: A case study in Latin America. Production Planning & Control, 23(1), 26–46. https://doi.org/10.1080/09537287.2010.539991
Craig, P. G. (1957). Location factors in the development of steel centers. Papers and Proceedings of the Regional Science Association, 3, 249–265. https://doi.org/10.1111/j.1435-5597.1957.tb01608.x
Crawford, G., & Williams, C. (1985). A note on the analysis of subjective judgment matrices. Journal of Mathematical Psychology, 29(4), 387–405. https://doi.org/10.1016/0022-2496(85)90002-1
Cunha, C. A. S., Lima, I. M., Caldas, G. B., Vieira Neto, J., Rangel, L. A. D., & Lima, G. B. A. (2024). Assessment of sustainable performance of the top five Brazilian steel industries using the TOPSIS technique with Gaussian AHP. Gestão & Produção, 31, e9823. https://doi.org/10.1590/1806-9649-2024v31e9823
De Felice, F., Petrillo, A., & Petrillo, L. (2021). Captive offshoring drivers in the manufacturing industry: Criteria and sub-criteria that influence the location choice. International Journal of Production Research, 59(1), 76–94. https://doi.org/10.1080/00207543.2019.1694718
de Mello, L. R. (1997). Foreign direct investment in developing countries and growth: A selective survey. The Journal of Development Studies, 34(1), 1–34. https://doi.org/10.1080/00220389708422501
Dedrick, J., Kraemer, K. L., & Shih, E. (2013). Information technology and productivity in developed and developing countries. Journal of Management Information Systems, 30(1), 97–122. https://doi.org/10.2753/MIS0742-1222300103
Devlin, A., Kossen, J., Goldie-Jones, H., & Yang, A. (2023). Global green hydrogen-based steel opportunities surrounding high quality renewable energy and iron ore deposits. Nature Communications, 14, 2578. https://doi.org/10.1038/s41467-023-38123-2
Entemiz, G. (2009). Rekabet ortamında otomotiv sanayinin yerseçimi yönlendiricileri ve mekansal etkileri: "İstanbul metropoliten alan ve yakın çevresi" örneği [Location drivers and spatial impacts of the automotive industry in a competitive environment: The case of the Istanbul metropolitan area and its surroundings] [Master's thesis, Istanbul Technical University].
European Union. (2023). Regulation (EU) 2023/956 of the European Parliament and of the Council of 10 May 2023 establishing a carbon border adjustment mechanism. Official Journal of the European Union, L 130, 16.5.2023.
Eurostat. (n.d.). SeaRoute: Shortest maritime routes [Computer software]. https://github.com/eurostat/searoute
Farahani, R. Z., SteadieSeifi, M., & Asgari, N. (2010). Multiple criteria facility location problems: A survey. Applied Mathematical Modelling, 34(7), 1689–1709. https://doi.org/10.1016/j.apm.2009.10.005
Forman, E., & Peniwati, K. (1998). Aggregating individual judgments and priorities with the analytic hierarchy process. European Journal of Operational Research, 108(1), 165–169. https://doi.org/10.1016/S0377-2217(97)00244-0
Gargi, Elberry, A. M., Järvinen, M., Adolfsson, A., & Thakur, J. (2026). GIS-based multi-criteria site suitability analysis of green hydrogen for decarbonisation of the iron & steel industry in Sweden. Energy 360, 5, 100071. https://doi.org/10.1016/j.energ.2026.100071
Geldermann, J., Spengler, T., & Rentz, O. (2000). Fuzzy outranking for environmental assessment. Case study: Iron and steel making industry. Fuzzy Sets and Systems, 115(1), 45–65. https://doi.org/10.1016/S0165-0114(99)00021-4
GlobalPetrolPrices. (2025). Electricity prices around the world: Business electricity rates, 2023–2025 average (Q4 2025 update). Retrieved September 27, 2026, from https://www.globalpetrolprices.com/electricity_prices/
Guerrero, M., Liñán, F., & Cáceres-Carrasco, F. R. (2021). The influence of ecosystems on the entrepreneurship process: A comparison across developed and developing economies. Small Business Economics, 57, 1733–1759. https://doi.org/10.1007/s11187-020-00392-2
Halili, G. (2026). searoute (Version 1.6.0) [Python package]. https://github.com/genthalili/searoute-py
Hirschman, A. O. (1957). Investment policies and "dualism" in underdeveloped countries. The American Economic Review, 47(5), 550–570.
IDOM. (n.d.). Iron ore mine project, Gâra Djebilet (Tindouf, Algeria). https://www.idom.com/en/project/iron-ore-mine-project-gara-djebilet-tindouf/
İnce, M. N., & Taşdemir, Ç. (2024). Facility location selection and layout planning through AHP, PROMETHEE, and CORELAP methods in the furniture industry. BioResources, 19(3), 6478–6509. https://doi.org/10.15376/biores.19.3.6478-6509
Indjikian, R., & Siegel, D. S. (2005). The impact of investment in IT on economic performance: Implications for developing countries. World Development, 33(5), 681–700. https://doi.org/10.1016/j.worlddev.2005.01.004
ITC. (2025). Market Access Map. International Trade Centre. https://www.macmap.org
Kabak, M., Javadi, H., Aktas, A., & Ecer, B. (2022). GIS-based multi-criteria decision making for site selection: An application of GRP pipe production plant. Journal of Multiple-Valued Logic and Soft Computing, 38, 407–429.
Kahraman, C., Ruan, D., & Doğan, I. (2003). Fuzzy group decision-making for facility location selection. Information Sciences, 157, 135–153. https://doi.org/10.1016/S0020-0255(03)00183-X
Karlson, S. H. (1983). Modeling location and production: An application to U.S. fully-integrated steel plants. The Review of Economics and Statistics, 65(1), 41–50. https://doi.org/10.2307/1924407
Kaya, M., & Yılmaz, C. (2016). Sanayide yer seçimini etkileyen faktörlere bir örnek: Türkiye Kibrit İnhisarı ve Sinop Kibrit Fabrikası [An example of site selection factors in industry: The Turkish Match Monopoly and the Sinop Match Factory]. Doğu Coğrafya Dergisi, 21(35), 107–130. https://doi.org/10.17295/dcd.69509
Kengpol, A., Rontlaong, P., & Tuominen, M. (2012). Design of a decision support system for site selection using fuzzy AHP: A case study of solar power plant in north eastern parts of Thailand. In Proceedings of PICMET '12: Technology Management for Emerging Technologies (pp. 734–743). IEEE.
Kesgingöz, H., Yeldan, M., & Güçlü, U. (2020). Analysis of Turkey's iron-steel industry in the world trade. International Journal of Management Economics and Business, 16(4), 854–869. https://doi.org/10.17130/ijmeb.811175
Kojima, K. (1985). Japanese and American direct investment in Asia: A comparative analysis. Hitotsubashi Journal of Economics, 26(1), 1–35.
Miketa, A., & Mulder, P. (2005). Energy productivity across developed and developing countries in 10 manufacturing sectors: Patterns of growth and convergence. Energy Economics, 27(3), 429–453. https://doi.org/10.1016/j.eneco.2005.01.004
Özekenci, E. K. (2024). International market selection based on integrated MCDM methods: A case study of iron and steel sector. Selçuk Üniversitesi Sosyal Bilimler Meslek Yüksekokulu Dergisi, 27(1), 274–293. https://doi.org/10.29249/selcuksbmyd.1440711
Peker, B. N., & Görener, A. (2023). Geliştirilmiş bulanık SWARA ve bulanık CODAS yöntemleriyle tesis yeri seçimi: İmalat sektöründe bir uygulama [Facility location selection with improved fuzzy SWARA and fuzzy CODAS methods: An application in the manufacturing sector]. Journal of Turkish Operations Management, 7(1), 1493–1512. https://doi.org/10.56554/jtom.1215975
PwC. (2025). Worldwide tax summaries: Corporate taxes on corporate income (Algeria, China, Romania, Türkiye). https://taxsummaries.pwc.com
Saaty, T. L. (1980). The analytic hierarchy process: Planning, priority setting, resource allocation. McGraw-Hill.
Shi, Z., Li, Y., Bohács, G., & Zhou, Q. (2022). A study on optimal location selection and semi-finished product inventory allocation in the steel industry. Sustainability, 14(22), 15279. https://doi.org/10.3390/su142215279
Singh, R. K., Chaudhary, N., & Saxena, N. (2018). Selection of warehouse location for a global supply chain: A case study. IIMB Management Review, 30(4), 343–356. https://doi.org/10.1016/j.iimb.2018.08.009
Sivaslıoğlu, F. (2024). Kuruluş yeri seçiminde kriterlerin önem ağırlıklarının SWARA yöntemi ile belirlenmesi [Determining the importance weights of criteria in facility location selection with the SWARA method]. Scientific Journal of Space Management and Space Economy, 4(2), 16–32.
Terme, B., Çiçek, İ., & Kiraz, A. (2022). Entegre bulanık AHP ve bulanık VIKOR yöntemleriyle tesis yeri seçimi [Facility location selection with integrated fuzzy AHP and fuzzy VIKOR methods]. Çukurova Üniversitesi Mühendislik Fakültesi Dergisi, 37(2), 383–398. https://doi.org/10.21605/cukurovaumfd.1146098
Transparency International. (2025). Corruption Perceptions Index 2024. Retrieved September 27, 2026, from https://files.transparencycdn.org/images/CPI2024_Report_Eng1.pdf
USGS. (2025). Mineral commodity summaries 2025. U.S. Geological Survey.
Wang, C.-N., Nguyen, V. T., Duong, D. H., & Thai, H. T. N. (2018). A hybrid fuzzy analysis network process (FANP) and the technique for order of preference by similarity to ideal solution (TOPSIS) approaches for solid waste to energy plant location selection in Vietnam. Applied Sciences, 8(7), 1100. https://doi.org/10.3390/app8071100
Weber, A. (1929). Alfred Weber's theory of the location of industries (C. J. Friedrich, Trans.). University of Chicago Press.
Wikipedia. (2026). Category: Iron mines in Romania [Articles on the Ocna de Fier, Cacova Ierii, Ghelari, Dognecea, Muncelu Mic, Băişoara, Lueta, Gârlişte and Teliuc deposits]. Retrieved September 27, 2026, from https://en.wikipedia.org/wiki/Category:Iron_mines_in_Romania
World Bank. (2025a). Worldwide Governance Indicators, 2025 update. https://www.worldbank.org/en/publication/worldwide-governance-indicators
World Bank. (2025b). World Development Indicators [Data set; GB.XPD.RSDV.GD.ZS, NY.GDP.MKTP.KN, LP.LPI.OVRL.XQ]. Retrieved September 27, 2026, from https://data.worldbank.org
World Steel Association. (2025a). World steel in figures 2025. worldsteel.
World Steel Association. (2025b, October 14). worldsteel Short Range Outlook October 2025 [Press release]. worldsteel.
Yang, J., & Lee, H. (1997). An AHP decision model for facility location selection. Facilities, 15(9/10), 241–254. https://doi.org/10.1108/02632779710178785
Yaşlıoğlu, M. M., & Önder, E. (2016). Solving facility location problem for a plastic goods manufacturing company in Turkey using AHP and TOPSIS methods. Yönetim Bilimleri Dergisi, 14(28), 223–249.
Yeşilkaya, M. (2018). Çok ölçütlü karar verme yöntemleri ile kağıt fabrikası kuruluş yeri seçimi [Paper factory location selection with multi-criteria decision-making methods]. Çukurova Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi, 33(4), 31–44. https://doi.org/10.21605/cukurovaummfd.521775
Yıldız, A., & Demir, Y. (2019). Bulanık TOPSIS yöntemiyle Türkiye'nin yerli otomobili için en uygun fabrika yerinin seçimi [Selection of the most suitable factory location for Türkiye's domestic automobile with the fuzzy TOPSIS method]. Business & Management Studies: An International Journal, 7(4), 1427–1445. https://doi.org/10.15295/bmij.v7i4.1210
Zavadskas, E. K., & Turskis, Z. (2011). Multiple criteria decision making (MCDM) methods in economics: An overview. Technological and Economic Development of Economy, 17(2), 397–427. https://doi.org/10.3846/20294913.2011.593291
Zavadskas, E. K., Turskis, Z., Antucheviciene, J., & Zakarevicius, A. (2012). Optimization of weighted aggregated sum product assessment. Elektronika ir Elektrotechnika, 122(6), 3–6. https://doi.org/10.5755/j01.eee.122.6.1810
Zavadskas, E. K., Turskis, Z., Stević, Ž., & Mardani, A. (2020). Modelling procedure for the selection of steel pipe supplier by applying the fuzzy AHP method. Operational Research in Engineering Sciences: Theory and Applications, 3(2), 39–53. https://doi.org/10.31181/oresta2003034z
Zeng, K., & Eastin, J. (2012). Do developing countries invest up? The environmental effects of foreign direct investment from less-developed countries. World Development, 40(11), 2221–2233.
Sakalli, A. & Önder, A. (2026). MULTI-STAGE STRATEGIC LOCATION SELECTION IN THE IRON AND STEEL INDUSTRY: A MACRO-LEVEL DECISION MODEL BASED ON GROUP AHP-WASPAS. In EROĞLU, Y. (Ed.), Optimization and Strategic Decision Models in Industrial Engineering (pp. -). Vizetek Yayıncılık. https://doi.org/10.54637/vizetek.9786253825010
| Kitap: |
| Yayınevi:
Vizetek Yayıncılık |